Spectrum 4 Series
Inserting Machines

Specifications

Equipment

F400 Base Unit: 1000mm long (1387 with stacker) x 520mm wide x 495mm high, Weight: 52kg

F401 Insert Feeder: 363mm long x 520mm wide x 495mm high, Weight: 26kg

F402 Folder: 363mm long x 520mm wide x 394mm high, Weight: 31kg

F413 Sheet Feeder: 558mm long x 520mm wide x 495mm high, Weight: 31kg

F407 Cross Folder: 1207mm long x 597mm wide x 569mm high, Weight: 60kg

F464 Sheet Feeder/F465 Outsort Unit: 1042mm long (1424mm with F465) x 534mm wide x 407mm high (712mm high with F465), Weight: 64kg (F464) 30kg (F465)

Noise Level: depends on system configuration

Speed: Up to a maximum of 4200 cycles per hour

Material

Envelopes:

Envelope Depth: 89mm to 163mm

Envelope Width: 162mm to 264mm

Envelope weights: 65gsm to 110gsm

End Clearance: End clearance between the Insert and envelope is a minimum of 12.5mm overall. This measurement should be taken with all documents placed into the envelope.

Depth Clearance: The Insert must allow a minimum clearance of 6mm below the flap crease after it is fully inserted into the envelope.

Flap Depth: 32mm to 58mm

Throat Depth: 6mm to 19mm, throat depth at 19mm in from edge of envelope must be between 1.6mm and 6mm.

Closed flap tip should not come closer than 35mm to bottom of envelope.

Material Requirements:

F401 Insert Feeder: 165-251mm wide x 63-152mm deep, 75gsm to 340gsm

F402 Folder: 165-251mm wide x 108-355mm deep, minimum fold 63mm

F413 Sheet Feeder: 165-251mm wide x 101-355mm deep, 75gsm to 120gsm

F407 Cross Folder (input): 165-317mm wide x 203-419mm deep, 80gsm to 91gsm

F407 Cross Folder (output/folded size): 140-216mm wide x 140-318mm long

F464 Sheet Feeder: 139-251mm wide x 153-407mm deep, 72gsm to 98gsm

 

Compliance

 

Pitney Bowes certifies that the SPECTRUM 4 Series™ complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC.