|
|
|
|
|
DA50s/55s Envelope Printer Specifications
|
 |
Equipment Physical Dimensions: 373mm high x 412mm wide x 551mm deep (without wireform) Weight: 20kg including print cartridge and catch bin. Electrical: 100-240VAC, 50/60Hz, 5.0A Interface: USB, Ethernet. Control Language: PCL5, modified Address Recovery: Memory buffer holds a maximum of 99 addresses. Print Modes (Print Resolution)
Resident Fonts
Resident Font Enhancements
Downloadable Fonts: Supports bitmapped, downloadable fonts. Cartridge Fonts: Not required. Fonts are downloaded with addresses. Barcode Printing: The DA50s and DA55s can print all types of barcodes including USPS certified POSTNET barcodes, FIM, 3 of 9, 4 state barcodes (UK, Canada, Europe, Australia), Planet barcodes used for delivery confirmation services and any barcode rendered by a Windows true type font. It is also capable of printing USPS certified IBIP barcodes as well as all types of 2-D barcodes defined for UK, Canada, Europe and Australia and others. Throughput: Up to 10,000 pieces per hour, depending on print mode, dpi, media size, number of address lines, and barcode imprinting. See Operators Guide Specifications for more details. Input Stacker Capacity: 200 #10 or DL size Envelopes Output Stacker Capacity: 150 #10 or DL size Envelopes Effective Print Area: The printable width is 240mm measured from the right side of the mailpiece. The printable height is 380mm measured from the bottom edge of the mailpiece. Ink Cartridge: User-replaceable ink jet Print Position Accuracy for a DL size envelope :
Print Position Accuracy for other media:
Operating Temperature: 12 to 35ºC Operating Humidity: 8 to 80% Storage Temperature (Printer): 5 to 40ºC Storage Humidity (Supplies): 10 to 90% Shipment Temperature (Printer): 4.5 to 60ºC Shipment Humidity (Supplies): 5 to 100% Noise Level: Idle <6.6 Bel (A), Operating <7.3 Bel(A), Operator position: no more than 65 dBa referenced to 20 µpa Recommended Usage: Pitney Bowes has tested this machine under many different conditions and recommends that you do not exceed the usage levels specified below:
NOTE: Usage beyond these recommended cycles is not covered under the Pitney Bowes Equipment Maintenance Agreement.
Material Approved Media: The paper types listed below are approved for use with the DA50s/DA55s Printers. Please note that the dimensional limits above apply in all cases, and that all media (flats, envelopes, postcards, catalog envelopes, etc.) must be without windows, unstuffed and unsealed.
Material Size: 152mm to 324mm wide x 89mm to 229mm high Material Thickness: 0.08mm to 3.175mm Material Notes: Envelopes have a flap along the long edge and are processed by the printer non-flap edge first. Envelopes may have either a diagonal or straight edge along the envelope flap. Booklets are defined as media having physical dimensions 152 x 230mm or larger. Booklets have an opening along their long edge which is covered by a flap with an adhesive seal. Catalog envelopes have an opening along their short edge which is closed by a flap with an adhesive seal. Postcards have no folds or bends. The printable side may have a higher surface roughness than the non-printable side. Self-mailers may be of "C," "Z," or 1/2-folded construction. They may not exceed the maximum allowable thickness as specified on the previous page and must be tabbed per postal regulations. A catalog may consist of multiple pages bound by adhesive or tabs on the feed edge or at 90 degrees with respect to the feed edge. Sheet stock may consist of 60 to 105gsm bond as well as 220 to 300gsm coated stock. The size and thickness constraints specified above apply.
Pitney Bowes certifies that the DA50s/DA55s complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC. |
||||||||||||||
 |
||||||||||||||||
