Equipment

Physical Dimensions: 330mm high x 480mm wide x 430mm deep (without wireform)

Weight: 23kg including print cartridge and catch bin.

Shipping weight: 25kg

Electrical: 100-240VAC (selectable), 50Hz, 126W

Interface: Centronics Parallel and serial port.

Control Language: PCL5, modified

Driver Compatibility: Windows 99/ME/2000/NT/XP compatible

Address Recovery: Memory buffer holds a maximum of 20 addresses

Print Modes (Print Resolution)

BLACK

• Draft: 200 x 600 dpi

• Letter Quality: 300 x 600 dpi

• Executive: 600 x 600 dpi

 

COLOUR (DA750/W790 only)

• Draft: 300 x 150 dpi

• Letter Quality: 300 x 200 dpi

• Executive: 300 x 300 dpi

Resident Fonts

Courier, Sans Serif, Baxter, Dingbat, Hancock, Marina, Quincy, Silicon, Springer, Stencil and Windmill.

Resident Font Enhancements

• Bold

• Expanded

• Condensed

• Italic

• Outline

Downloadable Fonts: Supports bitmapped, downloadable fonts.

Cartridge Fonts: Not required. Fonts are downloaded with addresses.

Barcode Printing: Can print a 5- or 11-digit USPS NAIC-certified POSTNET barcode in one of three positions: the lower right of the envelope; above the address block; and below the address block.

Throughput: Up to 13,000 pieces per hour (draft mode), depending on print mode, media size, number of address lines, and barcode imprinting.

Input Stacker Capacity: 600 DL size Envelopes

Output Stacker Capacity: 150 DL size Envelopes

Effective Print Area: The printable width is 240mm measured from the right side of the mailpiece. The printable height is 380mm measured from the bottom edge of the mailpiece.

Ink Cartridge: User-replaceable ink jet

Print Position Accuracy for a DL size envelope :

Horizontal: within +/- 1.5mm

Vertical: within +/- 1.5mm

Skew: within +/- 1 degree

Print Position Accuracy for other media:

Horizontal: within +/- 3.0mm

Vertical: within +/- 3.0mm

Skew: within +/- 2-1/2 degrees

Operating Temperature: 13 to 35ºC

Operating Humidity: 8 to 80%

Storage Temperature (Printer): -9 to 49ºC

Storage Humidity (Supplies): 5 to 95%

Shipment Temperature (Printer): -22 to 60ºC

Shipment Humidity (Supplies): 5 to 100%

Noise Level: Idle <6.6 Bel (A), Operating <7.3 Bel(A), Operator position: no more than 65 dBa referenced to 20 µpa

Recommended Usage: Pitney Bowes has tested this machine under many different conditions and recommends that you do not exceed the usage levels specified below:

• Monthly usage is 86,000 pieces (250,000 pieces maximum)

• Yearly usage is 300,000 pieces

NOTE: Usage beyond these recommended cycles is not covered under the Pitney Bowes Equipment Maintenance Agreement.

• Product life is 5 years or 5,160,000 cycles

Material

Approved Media: The paper types listed below are approved for use with the printer. Please note that the dimensional limits above apply in all cases, and that all media (flats, envelopes, postcards, catalog envelopes, etc.) must be without windows, unstuffed and unsealed.

• White Wove

• Bond paper

• Recycled paper

• Coated paper

• Card stock

• Brown kraft

• Manilla

Material Size: 76mm to 399.4mm wide x 127mm to 381mm high

Material Thickness: 0.0762mm to 6.35mm

Material Notes:

Envelopes have a flap along the long edge and are processed by the printer non-flap edge first. Envelopes may have either a diagonal or straight edge along the envelope flap.

Booklets are defined as media having physical dimensions 152 x 229mm or larger. Booklets have an opening along their long edge which is covered by a flap with an adhesive seal.

Catalog envelopes have an opening along their short edge which is closed by a flap with an adhesive seal.

Postcards have no folds or bends. The printable side may have a higher surface roughness than the non-printable side.

Self-mailers may be of "C," "Z," or 1/2-folded construction. They may not exceed the maximum allowable thickness as specified on the previous page and must be tabbed per postal regulations.

A catalog may consist of multiple pages bound by adhesive or tabs on the feed edge or at 90 degrees with respect to the feed edge.

Sheet stock may consist of 60 to 105gsm bond as well as 227 to 302gsm coated stock. The size and thickness constraints specified above apply.

Compliance

 

Pitney Bowes certifies that the DA700/DA750/W790 complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC.