FD30 Folding Machine

Specifications

Equipment

Dimensions: 417mm wide x 633mm long x 229mm high

 

Weight: 15.5 kg; (16.2 kg shipping weight)

 

Electrical: 230VAC; 50Hz, 0.5A

 

Operating Speed Max.: 10000 sheets/hour (A4, 80gsm) Actual speed will depend on the type and conditions of the system, the material used, operator skill and environmental conditions.

 

Nominal Usage: 750 pieces/day; 15,000 pieces/month. Maximum peak operation is to be 10,000 pieces no more than one day per month.

 

Sound Level: Less than 70dBA, A-Weighted sound level at operator position. Measured in accordance with applicable ANSI and ISO standards.

 

Operating temperature range: 13 - 35ºC

 

Operating relative humidity: 20 - 80% (noncondensing)

 

Fold Types: Based on the limitation that the shortest panel, in any fold, may not be shorter than 105mm, the FD30 is capable of producing the following folds:

• Single (half) fold

• Z (accordion) fold

• Standard Letter (C) fold

• Double Parallel fold

 

Fold Plate Ranges: 70 - 240mm (fold plate 1), 50 - 135mm (fold plate 2)

 

Material Specifications

Width: 80mm to 230mm

 

Length: 140mm to 355mm

 

Paper weight: 53gsm Minimum (Bond Stock), 170gsm Maximum (Cross Grain)

 

Material feed tray/Stacker: The feed tray has a capacity of 150 sheets and the output tray has a capacity of 100 sheets (A4, 80gsm bond, standard letter (C) fold).

 

Forms: The FD30 can process, hand fed, stapled, or non-stapled collations of up to three sheets of 80gsm, A4 bond paper. Maximum thickness is 0.3mm.

 

Compliance

Pitney Bowes certifies that the FD30 complies with the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC. The product was tested in a typical configuration.