DF400 and FD60
OfficeRight Folders

Specifications

Equipment

Dimensions:

Depth: 254mm

Width: 356mm

Height: 508mm, excluding feed tray

Weight: 14kg

Minimum Clearance: 914mm on three sides of the machine is recommended for Operator access. Recommended table height is 760mm. 

Electrical:

Input: 100-240VAC, 50-60Hz, 1.5A

Output: 24VDC, 3.0A 

Operating Speed:

Max.: 140 sheets/minute (Speed nominal for A4, 80gsm paper)

Actual speed will depend on the type and conditions of the system, the material used, operator skill andenvironmental conditions.

Nominal Usage: 650 pieces/day; 15,000 pieces/month

Maximum peak operation is to be 15,000 pieces, no more than one day per month.

Maximum peak operation is to be 30,000 pieces permonth.

Sound Level: Less than 70dBA (RE 20 µPa), A-Weighted sound level at operator position. Measured in accordance with applicable ANSI and ISO standards.

Environmental (operating):

Ambient temperature: 13 - 35°C

Relative humidity: 8 - 95% (non-condensing)

Maximum Wet Bulb: 29°C

Fold Types: Based on the limitation that the shortest panel, in any fold, may not be shorter than 40mm, the folder is capable of producing the following folds:

Single (H) fold

Accordion (Z) fold

Letter (C) fold (except 216mm x 355mm)

Double Parallel (D) fold

Fold Plate Ranges:

Dimension A: 40mm to 203mm

Dimension B: 40mm to 120mm

Material

Material Size:

Minimum sheet size: 146mm Wide x 152mm Deep

Maximum sheet size: 216mm Wide x 355mm Deep

Paper weight: 60gsm to 90gsm

Material feed tray/Stacker: The feed tray has a capacity of at least 125 sheets (60gsm) and the output tray has a stacker height of 100mm or more to handle the maximum input hopper capacity.

Forms: The folder can fold up to two (80gsm) collated sheets per machine cycle.

Standard Paper Sizes:

A4:  210mm W x  297mm D

A5: 148mm W x 210mm D

B5: 182mm W x 257mm D

8.5"x11":  216mm W x 279mm D

8.5"x14":  216mm W x 356mm D