W700 and W770 Envelope Printers

Specifications

IMPORTANT

The specifications below are subject to material test and are subject to change without notice. They are supplied for information purposes only and do not form any guarantee of machine performance by Pitney Bowes.

Equipment

Physical Dimensions: 330mm high x 483mm wide x 432mm deep

Weight: 22.5kg

Electrical: 220-240VAC, 50Hz, 126W, 430 BTU/hr

Print Modes (Print Resolution)

• Draft: 150 dpi

• Letter Quality: 200 dpi

• Executive: 300 dpi

Resident Fonts (W700): Courier, Sans Serif, Roman

Resident Fonts (W770): Courier, Sans Serif, Roman, Baxter, Dingbat, Hancock, Marina, Quincy, Silicon, Springer, Stencil, Windmill, Code 39, OCR-A. (Note: Code 39 not selectable from the menu, only available using escape codes.)

Throughput: The following throughput specifications are typical for DL size envelopes, 18 characters per line, 10pt type, 3 lines per address, no barcode, 127mm print margin.

Draft Letter Executive
W700 5,000 4,200 4,000
W770 7,000 6,600 6,000

Effective Print Area: The printable width is 239mm measured from the right side of the mailpiece. The printable height is 381mm measured from the bottom edge of the mailpiece.

Operating Temperature: 12 to 35ºC

Operating Humidity: 8 to 80%

Storage Temperature: 5 to 40ºC

Storage Humidity: 10 to 90%

Noise Level: no more than 65 dBa referenced to 20 µpa

Product Life: 5 years or 3,600,000

 

Material

Material Size: 75mm x 127mm to 330mm x 394mm

Material Thickness: 0.08mm to 3.2mm

 

Compliance
 

Pitney Bowes certifies that the W700 and W770 comply with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC.