|
IMPORTANT
|
The specifications below are subject to material test and are subject to change without notice. They are supplied for information purposes only and do not form any guarantee of machine performance by Pitney Bowes.
|
Material Specifications
Sheet Feeders A1 and/or A2
Sheet Size: DIN A4 (297mm x 210mm)
Paper Weight: 75gsm to 90gsm
Capacity: to Max fill line (approx. 80 sheets of 80gsm)
Type: Suitable for normal copier/laser printer bond paper. Do not run perforated, NCR or coated papers.
Insert Feeder C (Optional)
Insert Size: Width 127mm to 225mm, Depth 86mm to 114mm
Material Weight: Unfolded document 70gsm to 200gsm. Trifolded document 70gsm to 90gsm.
Capacity: 60 off 90gsm Business Reply Envelopes maximum
Type: Suitable for pre-folded, single panel inserts or Business Reply Envelopes, etc.
Envelope Feeder B
Envelope Size: DL Mailer only. Width 225mm to 235mm, Depth 110mm to 121mm.
Envelope Weight: 70gsm to 90gsm
Capacity: 60 off 90gsm envelopes maximum
Envelope Flap Type: Executive (triangular) flap
Envelope Flap Length: 32mm to 57mm
End Clearance: End clearance between the contents and envelope is a minimum of 5mm each side (10mm overall). This measurement should be taken with all contents placed into the envelope.
Depth Clearance: The contents must allow a minimum clearance of 6mm below the flap crease after being fully inserted into the envelope.
Manual Feeder M
Stapled or unstapled sets of up to 3 sheets of 80gsm paper can be processed.
Sheet Feeders A1 and A2 cannot be used in conjunction with the Manual Feeder.
Glossy/coated sheets are not recommended.
Sealer
The machine can seal up to a maximum of 1,000 envelopes between refills.
Stacker
Stacker capacity is up to 60 filled envelopes, depending on contents of envelope.
Material Requirements
Materials should be good quality and properly stored. Recommended storage conditions: 18°C to 25°C, 40% to 60% relative humidity
Machine Specifications
Physical Dimensions
Width 440mm, Depth 530mm, Height 365mm (without optional sheet feeder 2), 440mm (with optional sheet feeder 2)
Weight
17kg
Noise Level
Running
less than 70dBA Electrical
240V, 50Hz, 1A
Speed
Up to a maximum of 900 cycles per hour
Duty Cycle
Up to a maximum of 4,000 cycles per month with an average of 2,000 cycles per month and a maximum life of 120,000 cycles.
Compliance
Pitney Bowes certifies that the DI200 and OfficeRightª Mailer series comply with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC. The products were tested in a typical configuration.
|
